HP Vectra VE 5/xxx - 2 User Manual page 110

Hp vectra ve 5/xx series 2, user's guide
Hide thumbs Also See for Vectra VE 5/xxx - 2:
Table of Contents

Advertisement

NOTE
6 Technical Information
Specifications
Consumption at 230V / 50Hz
75MHz
Off
2.7w
1
Windows
22.6w
1
Sleep
18.5w
1
WIN + HDD
30w
1.
Loading a CD-ROM in the CD-ROM drive will increase
these values by 10w.
When the PC is turned off with the power button on the front panel, the
power consumption falls below 5 Watts, but is not zero. The special
on/off method used by this PC considerably extends the lifetime of the
power supply. To reach zero power consumption in "off" mode, either
unplug the PC from the power outlet or use a power block with a switch.
You should be aware that the PC will lose its time settings within a few
days if you unplug the PC, or switch off the PC at the power block.
Typical Power Consumption/Availability for ISA Accessory Slots
+5 V
4.5A limit per slot (limited by system board)
+12 V
1.5A limit per slot (limited by system board)
-5 V
0.1A total power limit (limited by power supply)
-12 V
0.3A total power limit (limited by power supply)
Typical Power Consumption/Availability for PCI Accessory Slots
+5 V
4.5A maximum per slot
+12 V
0.5A maximum per slot
-12 V
0.1A maximum per slot
There is a maximum per-slot limit of 25 W between all supply rails.
98
English
100MHz
133MHz
2.7w
2.7w
23.6w
23.4w
19.6w
19.4w
33w
34w

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra ve 5/xx series 2

Table of Contents