Table of Contents
Advertisement
Removal and replacement procedures
7. Remove the four Phillips PM2.5×6.0 screws 1 that secure the display assembly to the computer.
8. Remove the display assembly 2.
9. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the
Mylar screw covers 1 and the two Phillips PM2.5×5.0 screws 2 on the display bezel lower edge.The display
rubber screw covers are included in the Display Rubber Kit, spare part number 487283-001.
4–30
Maintenance and Service Guide
Advertisement
Table of Contents
