Synchronizing The Wireless Keyboard Or Mouse - HP TouchSmart IQ820 - Desktop PC Getting Started Manual

Synchronizing the wireless keyboard or mouse

The wireless keyboard and mouse are presynchronized to work with your HP TouchSmart PC. They should
work immediately after pulling out the battery tabs, which activate the preinstalled batteries. If needed, turn
the mouse switch to the On position (B).
You may need to manually synchronize the wireless keyboard or mouse if they are not responding.
To synchronize them:
Make sure the keyboard and mouse are next to the HP TouchSmart PC, within 30 cm (1 foot) and
away from interference from other devices.
Keyboard: Press the connect button on the bottom of the keyboard (A) for five seconds. The blue
activity LED illuminates from the lower back grill of the computer when the synchronization command
has been received. It turns off when synchronization is complete.
Mouse: Press the connect button on the bottom of the mouse (C) for five seconds. The blue activity LED
illuminates from the lower back grill of the computer when the synchronization command has been
received. It turns off when synchronization is complete.
A
If this does not work, remove and then re-insert the wireless keyboard and mouse receiver from the back of
the computer and then synchronize the keyboard and mouse again.
12
Getting Started (Features may vary by model)
B C