Synchronizing The Optional Wireless Keyboard And Mouse - HP ProOne 400 G1 All-in-One Hardware Reference Manual

Synchronizing the optional wireless keyboard and mouse

The optional wireless keyboard and mouse are easy to set up. Just remove the battery tabs on both
the keyboard and the mouse to activate the preinstalled batteries.
NOTE: For better mouse battery life and performance, avoid using your mouse on a dark or high-
gloss surface, and turn mouse power off when not in use.
To synchronize the wireless keyboard and mouse:
1. Make sure the keyboard and mouse are next to the computer, within 30 cm (1 foot) and away
from interference from other devices.
2. Turn on the computer.
3. Make sure the Power switch on the bottom of the mouse is in the On position.
4. Insert the wireless receiver into a USB port on the computer.
Figure 3-4
5. Press and hold the Connect button on the wireless receiver for five seconds until the blue activity
LED begins blinking.
NOTE:
mouse with the wireless receiver.
6. Press and release the Connect button on the bottom of the mouse. The blue activity LED from
the wireless receiver turns off when synchronization is complete.
NOTE:
of the wireless receiver and the mouse will be broken. Turn the mouse off, then on again to
restore the synchronization.
NOTE: If the procedure does not work, remove and then reinsert the wireless keyboard and mouse
receiver from the back of the computer and then synchronize the keyboard and mouse again. If
synchronization still does not work, remove and replace the batteries.
Installing the wireless receiver
When the blue activity LED begins blinking, you have 30 seconds to synchronize the
If the Connect button on the bottom of the mouse is pressed again, the synchronization
Synchronizing the optional wireless keyboard and mouse 15