Reliability; Agency Certification; Safety Certification; Electromagnetic Compatibility - Seagate ST9120822A - Momentus 5400.3 120 GB Hard Drive Product Manual

Momentus 5400.3 pata product manual
Hide thumbs Also See for ST9120822A - Momentus 5400.3 120 GB Hard Drive:
Table of Contents

Advertisement

2.13

Reliability

Measurement type
Nonrecoverable read errors
Annualized Failure Rate (AFR)
Load/Unload (U/UL)
25°C, 50% relative humidity
32°C, 80% relative humidity
5°C, 80% relative humidity
5°C, 10% relative humidity
55°C, 16% relative humidity
Warranty
2.14

Agency certification

2.14.1

Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2 (950) and meet all applicable sections
of IEC950 and EN 60950 as tested by TUV North America.
2.14.2

Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec-
tromagnetic Compatibility Directive (89/336/EEC). Testing is performed to the levels specified by the product
standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and
the immunity levels are defined by EN 55024.
Seagate uses an independent laboratory to confirm compliance with the EC directives specified in the previous
paragraph. Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply
with the directives when used in the test systems, we cannot guarantee that all systems will comply with the
directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O
cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators
should confirm EMC compliance and provide CE marking for their products.
18
Specification
14
1 per 10
bits read, max.
<0.60%
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
600,000 software-controlled power on/off cycles
20,000 hard power on/off cycles
5 years on distribution units.
To determine the warranty for a specific drive, use a web browser to access the fol-
lowing web page:
www.seagate.com/support/service/
From this page, click on the "Verify Your Warranty" link. You will be asked to pro-
vide the drive serial number, model number (or part number) and country of pur-
chase. The system will display the warranty information for your drive.
Momentus 5400.3 PATA Product Manual, Rev. C

Advertisement

Table of Contents
loading

Table of Contents