Command Line Syntax; Input File Parameters; [Display] - HP t5630 - Thin Client Using Manual

Command Line Syntax

For local file-based processing, use the following command line syntax:
C:\Windows\XPePrep.exe <path to .ini file>
For example: C:\Windows\XPePrep.exe c:\xpeprep.ini.
You must specify the full path to the .INI file. This command line cannot be a relative path.
For DHCP FTP-based processing, use the following command line syntax:
C:\Windows\XPePrep.exe

Input File Parameters

The following tables list input file parameters for [Display], [GUIUnattended], [Userdata],
[Internet], and [XpePrep].

[Display]

Setting
BitsPerPel
= INT
Vrefresh
= INT
Xresolution
= INT
Yresolution
= INT
If the system has multiple monitors, the same settings will be applied to all monitors.
Specifying a setting that the monitor and/or graphics card does not support will prevent the device
from operating.
Description
This setting specifies color depth in bits per pixel. Possible values could
be 4, 8, 16, 24, or 32 depending on video driver/monitor support.
This setting will be ignored if not specified.
This setting specifies refresh rate in Hertz of the display adapter.
Possible values could be 0, 65, 70, 72, etc. depending on the
monitor/video adapter.
This setting specifies horizontal resolution of the display.
This setting will be ignored if not specified.
This setting specifies vertical resolution of the display.
This setting will be ignored if not specified.
8