Updating Your Printer Firmware; Checking The Current Firmware Version; Updating The Firmware - Epson SureColor T3000 Setup Manual

To connect to a network hub or directly to your computer's network interface, you need a standard RJ-45
CAT-6 network cable.
Plug the interface cable into the appropriate port on the printer.
1.
Plug the other end of the cable into the appropriate port on your computer or network switch or hub.
2.

Updating Your Printer Firmware

To keep your printer features and functionality up to date, you should check for a new version of firmware
on the Epson support site and update your printer, if necessary.

Checking the Current Firmware Version

Press the button twice to highlight
1.
r
Press the button.
Menu
2.
Press the button until
3.
d
Press again. Note the firmware version displayed. When finished, press the
OK
4.

Updating the Firmware

Before updating your printer's firmware, make sure your printer is turned on and connected to your
computer or network.
Click the
EPSON LFP Remote Panel 2
1.
Panel 2. Make sure your printer is selected from the drop-down menu.
Click the
Firmware Updater
2.
settings.
is highlighted, then press
Printer Status
icon on your desktop. You see the EPSON LFP Remote
button. You see the Firmware Updater window.
Updating Your Printer Firmware
.
OK
|
21
button.