Seagate ST34520N - Medalist 4.55 GB Hard Drive Product Manual page 93

Medalist Pro Product Manual, Rev. D
Sense
key Description
37 00 Rounded parameter error
39 00 Saved parameters not supported
3D 00 Identify message with invalid bits
3F 00 Target operation command changed
3F 01 Microcode changed
3F 02 SCSI-1/SCSI-2 change
40 00 Target operating conditions have changed
40 01 DRAM parity error detected
40 93 Error in write to flash
42 00 Power on or self test error
43 00 Message reject error
44 00 Internal controller error
45 00 Selection or reselection error
47 00 Bus parity error
48 00 Initiator detected error
49 00 Initiator received invalid message from drive
4E 00 Drive attempted overlapped commands
5B 00 Log exception—factory option
5B 01 Threshold condition met—factory option
5B 02 Log counter reached maximum value—factory option
5B 03 Log list codes all used—factory option
5C 00 RPL status change, drive lost synchronization
80 00 General firmware error qualifier
Supported
N
Y
N
N
Y
N
Y
Y
Y
N
Y
N
N
Y
Y
Y
Y
N
Y
N
N
N
N
83