Figure 5. Recommended Mounting - Seagate ST34520N - Medalist 4.55 GB Hard Drive Product Manual

Medalist Pro Product Manual, Rev. D
Z
Y
X
Note. Use four screws (two per side) when
using the mounting holes located on
the sides of the drive.
See Section 8.4 when using the
mounting holes located on the
bottom of the drive.
Figure 5. Recommended mounting
6.4.4.2 Vibration
a. Operating - normal
The drive as installed for normal operation, shall comply with the complete specified performance while
subjected to continuous vibration not exceeding
5-22 Hz @ 0.020 inch displacement (peak to peak)
22-300 Hz @ 0.5 g acceleration (zero to peak)
Vibration may be applied in the X, Y, or Z axis.
b. Operating - abnormal
22-300 Hz @ TBD g (X, Y, or Z axis)
c. Non-operating
The limits of non-operating vibration shall apply to all conditions of handling and transportation. This
includes both isolated drives and integrated drives.
25
X
Z Y