Denon DHT-589BA Owner's Manual page 54

ENGLISH
GAudioH
Symptom Cause
No sound is • You are playing a monaural
produced from source (TV, AM radio broadcast,
center speaker. etc.) in the "STANDARD" (Dolby/
DTS Surround) mode.
No sound • The surround mode is set to
is produced "STEREO" or "DIRECT".
from surround
speakers.
No sound is • Subwoofer's power not turned
produced from on.
subwoofer. • The "Subwoofer" setting at
"Speaker Setup" is set to "No".
• The subwoofer is not properly
connected.
• The subwoofer's
turned off.
No test tones are • Surround mode not set to
produced when " S TA N D A R D " ( D o l b y / D T S
remote control Surround).
TEST
unit's button
is pressed.
DTS sound is not • DVD player's audio output setting
output. is not set to bitstream.
• DVD player is not compatible
with DTS sound playback.
• The AVR-589's "Input Mode"
setting is set to other than
"DTS".
GVideoH
Symptom Cause
No picture • The connections between the
appears. AVR-589 and monitor are faulty.
• The connection terminal of the
AVR-589 and the connection
terminal of the monitor are not of
the same type.
DVDs cannot be –
copied on a VCR.

Countermeasure
• The mode is set to something
other than "STANDARD" (Dolby/
DTS Surround).
• Set to a surround playback
mode.
• Turn on the subwoofer's power.
• Set to "Yes".
• Check the connections.
volume is • Adjust the subwoofer's volume
to an appropriate level.
• Set to the "STANDARD"(Dolby/
DTS Surround) mode.
• Set the DVD player. For details,
refer to the DVD player's
operating instructions.
• Use a DTS-compatible player.
• Set to the "Auto" or "DTS"
mode.
Countermeasure
• Check the connections.
• Because video signals are output
from the AVR-589's monitor
output terminal in the same
format as the video input signals,
the monitor output terminal
should be of the same type as
the terminal used for input.
• This is not a malfunction. Most
movie software includes copy
prevention signals and cannot be
copied.
GHDMIH
Page Symptom
27 HDMI audio
signals are not
output from
speakers.
28
No picture • The connections to the HDMI
appears connectors are faulty.
with HDMI • HDMI input setting is improper.
–
connections. • The HDMI format of the player
and monitor do not match.
21
No sound is • HDMI input setting is improper.
9 output from
the monitor
40 connected
with HDMI
connections.
27
GiPodH
Symptom
iPod cannot be • The input source assigned to
–
played. control dock for iPod is not
selected.
• Cable is not properly connected.
–
• Control
adapter is not connected to
34
power outlet.
Page
10 ~ 13
–
–
Cause Countermeasure
– • The audio signal input to the
HDMI input connector cannot be
played on the AVR-589. Input the
audio signal to the digital audio
input connector or analog audio
input connector.
• Check the connections.
• Check the HDMI input setting.
• Match the HDMI format of the
player and monitor.
• Check the HDMI input setting.
Cause Countermeasure
• Switch to the input source
assigned at control dock for
iPod.
• Reconnect.
dock for iPod's AC • Plug the control dock for iPod's
AC adapter into a power outlet.
Page
10
10
23
10
23
Page
24
12
–