Cpu Slot Alignment Holes; Installing The Processor Module - HP Rx2620-2 - Integrity - 0 MB RAM Service Manual

Figure 4-33 CPU Slot Alignment Holes
Figure 4-34 Installing the Processor Module
CAUTION:
Do not press the processor module into the socket. When properly aligned, the
processor pins seat into the ZIF socket. No additional pressure is required.
6. Use the special processor tool shipped with the replacement processor module to lock the
processor module in place on the system board. To do this, insert the special processor tool
through the turbo fan blades into the ZIF socket. Rotate the tool clockwise 180 degrees. See
Figure 4-35.
Removing and Replacing Internal Components 67