Acpi Bios Mode; Using The Acpi Bios Mode Feature - IBM NetVista A20 User Manual

ACPI BIOS Mode

Using the ACPI BIOS Mode feature

Follow these steps to use the ACPI BIOS Mode feature:
1. Start the Configuration/Setup Utility (see "Configuration/Setup Utility
overview" on page 4-2.)
2. Set Power Management from the Configuration/Setup Utility menu.
3. Set ACPI BIOS Mode to Enabled or Disabled using the Right or Left arrow
key.
4. Press Esc to return to the Configuration/Setup Utility menu.
5. Before you exit from the program, select Save Settings from the
Configuration/Setup Utility menu.
6. To exit from the Configuration/Setup Utility menu, press Esc and follow the
instructions on the screen.
3-2 IBM Personal Computer User Guide