Replacing The System Battery - IBM NetVista A20 User Manual

Replacing the system battery

Follow these steps to replace the battery:
Before replacing the lithium battery review the
lithium battery notice on "Lithium battery
Note:
notice" on page xi.
1. Note the orientation of the battery in the bracket.
2. Press outward on the metal latch and lift the battery out.
3. Insert a new 3V lithium battery (CR2032) into the bracket and press it down
until the securing clip clicks and locks the battery in if you replace the system
battery, you need to reset the system date and time in Setup.I
Make sure you insert the battery with the
Important: positive side on top. A plus (+) sign indicates
the positive side.
Adding and replacing system board components 7-7