HP Brio ba300 Troubleshooting Manual page 18

Hp brio ba300, troubleshooting guide
Hide thumbs Also See for Brio ba300:
Table of Contents

Advertisement

If You Have a Problem
The PC Hangs While Recording
Have you checked that...
You are not filling up your hard disk with
uncompressed digital audio. For example, one
minute of stereo sound recorded at a resolution of
44 kHz will occupy about 10.5 MB.
No Output From 8 or 16 Bit Digitized Sounds
Have you checked that...
You do not have an interrupt conflict or that you
have not selected the wrong DMA channel
Audio Input From Microphone Too Low
Have you checked that...
The microphone specifications meet the
requirements of the 16-bit sound components. The
microphone should be a 600-ohm electret type.
18
How
Ö
• Before recording, check that there is enough free space on your hard
disk.
• Data compression can reduce the space required. The A-law and m-
law hardware compression used by the audio interface enables the
sampling of sound at a resolution of 16-bits, but it generates the
same quantity of data as an 8-bit sample.
How
Ö
Use your operating system's audio control software to change the audio
interface's DMA channel or IRQ setting
How
Ö
Check the documentation that came with your microphone

Advertisement

Table of Contents
loading

Table of Contents