Lenovo IdeaCentre Q200 Hardware Replacement Manual page 30

Q200 hardware replacement guide

Hide thumbs Also See for IdeaCentre Q200:

Table of Contents

12. Holding the microprocessor with your ﬁngers, position the microprocessor

so that the notches on the microprocessor are aligned with the tabs in the

microprocessor socket.

Important

To avoid damaging the microprocessor contacts, do not tilt the

microprocessor when installing it into the socket.

13. Lower the microprocessor straight down into the system board socket of the

system board.

14. To secure the microprocessor in the socket, close the microprocessor retainer

and lock it into position with the small handle.

15. Use the thermal grease syringe to place ﬁve drops of grease on the top of the

microprocessor. Each drop of grease should be 0.03ml (3 tick marks on the

grease syringe).

31032756_HaWaii-HRG_EN.indd 27

Hardware Replacement Guide

2008.1.8 3:31:39 PM

Table of Contents

Ideacentre q series