Lenovo IdeaCentre Q200 Hardware Replacement Manual page 29

Important
Do not touch the gold contacts on the bottom of the microprocessor.
When handling the microprocessor, touch only the sides.
9. Lift the microprocessor straight up and out of the socket.
Notes
a. Note the orientation of the notches
important when reinstalling the microprocessor on the new system
board.
b. Do not drop anything onto the microprocessor socket while it is
exposed. The socket pins must be kept as clean as possible.
10. Make sure that the microprocessor retainer is fully open.
11. Holding the microprocessor with your fingers, remove the protective cover
that protects the gold contacts on the new microprocessor
26
Hardware Replacement Guide
31032756_HaWaii-HRG_EN.indd 26
on the microprocessor. This is
.
2008.1.8 3:31:38 PM