Watching Channels From An External Device; Sleep Timer; Switching Audio Mode - Philips 32PFL4908/F7 User Manual

Watching channels from an external device

Switching Each Input Mode can easily switch with the remote control
between TV (DTV or Analog TV) and external devices when they are
connected to the unit.
1
Turn On a set-top box or the connected device.
• The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the set-top box or the
connected device and wait a few seconds till the picture appears.
e.g.)
11.1
Source
TV DTV / Analog TV
channel
HDMI1
HDMI2
HDMI3
Video
PC
PC
• Pressing ▲ reverses the direction of the Input modes.
2
Use the remote control of the set-top box or the connected device
to select channels.

Sleep timer

Sleep Timer can set the unit to go into Standby mode after an
incremental period of time.
Press SLEEP repeatedly to change the amount of
time (increases the time by 30 minutes up to 120
minutes).
Press SLEEP once to call up the display for checking the remaining time.
• To cancel sleep timer, press SLEEP repeatedly until Off is displayed.
HDMI1 HDMI2
Video
HDMI3
or
Component
Sleep 120min.

Switching audio mode

Digital TV operation
1
Press SAP to display the currently selected language
and the number of available languages.
2
Press SAP repeatedly to cycle through the available
audio languages.
Note
• Available languages differ depending on the broadcast.
• Other is displayed when the audio language cannot be acquired or the acquired
languages are other than English, French or Spanish.
Analog/Cable TV operation
1
Press SAP to display the currently selected audio mode.
2
While receiving an MTS broadcast, press repeatedly
to cycle through the available audio channels.
e.g.) When all audio are available
SAP/STEREO SAP/MONO
STEREO :
Outputs stereo-audio
SAP : Outputs second audio program
MONO : Outputs mono-audio
19
English
11.1
English 1/3
11
SAP / STEREO
SAP/STEREO