Picture - Philips 32PFL4908/F7 User Manual

Picture

Before you begin:
You must Set Home in Location. ➟ p.31
Otherwise, personalized Picture and Sound settings will not be
Memorized after the unit goes into Standby mode.
1
Press and use ▲▼ to select Picture then press OK.
Picture Settings assistant
Sound Auto picture
Setup Backlight
Features Contrast
Language Brightness
USB Color
Tint
Sharpness
Advanced settings
2
Use ▲▼◄► to select the item you want to adjust, then press
OK.
Settings assistant
to guide you through the best picture setting
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game and
Auto picture
Eco)
When you adjust the following settings, Personal
picture will be set automatically.
Cursor ◄
to reduce power
Backlight
consumption
Contrast
to decrease contrast
Brightness to decrease brightness
Color
to decrease color intensity to increase color intensity
Tint
to add red
Sharpness
to soften
to select the desired setting, then press OK
Advanced settings
(Color alignment, Noise reduction, Active Control*,
Black stretch, Dynamic contrast and Gamma)
Note
• Adjusts backlight for the best picture quality by dynamically adjusting the backlight
intensity in accordance with lighting condition in the room when Active Control* is
set to On. Please ensure the room lighting is stable and the light sensor is not blocked.
* 50PFL3708 / 46PFL3708 / 40PFL4708 / 39PFL2708 only.
Personal
18
50
30
30
0
2
Cursor ►
to set the backlight
brighter
to increase contrast
to increase brightness
to add green
to sharpen
• You can set a particular Picture Quality using Advanced settings.
Picture Color alignment
Sound Noise reduction
*
Setup Active Control
Features Black stretch
Language Dynamic contrast
USB Gamma
to set the picture color temperature to
Color
Personal (Cool, Normal or Warm)
temperature
When you adjust the following settings,
mode
Personal picture will be set automatically.
to decrease contrast
Red gain
with red
to decrease contrast
Green gain
Color
with green
alignment
to decrease contrast
Blue gain
with blue
to decrease brightness
Red offset
with red
Green to decrease brightness
offset with green
to decrease brightness
Blue offset
with blue
Off
to set noise reduction to Off
Noise
reduction
On
to reduce noise in an image
Off
to set Active Control to Off
to adjust backlight for the best picture quality by
*Active
Ambient On
dynamically adjusting the backlight intensity in
Control
accordance with lighting condition in the room
to adjust backlight for best picture quality
Ambient Off
based on the incoming video signal
Off
to set black stretch to Off
Black
stretch
On
to enhance black color
Off
to set dynamic contrast to Off
Dynamic
contrast
On to enhance contrast in an image automatically
Gamma 1
Gamma Gamma 2
to change the gamma setting
Gamma 3
* 50PFL3708 / 46PFL3708 / 40PFL4708 / 39PFL2708 only.
Normal
On
On
On
On
Gamma 2
Cursor ◄ Cursor ►
to increase contrast
with red
to increase contrast
with green
to increase contrast
with blue
to increase brightness
with red
to increase brightness
with green
to increase brightness
with blue
23
English