Remove Users From The Hp Sam Administrator Group - HP BladeSystem bc2000 - Blade PC Administrator's Manual

c. Search for groups by entering characters in the search field. Results are shown as you type.
You can highlight one group and use the View button to see the users in the group.
d. Click Add to add highlighted groups into the list.
e. Select the groups in the list that you want to add into HP SAM.
f. Click Save.
NOTE:
Group. If an SG or OU is already in HP SAM, the attributes are changed to match what is set here.
NOTE: To make future changes, go to Active Directory and add or remove users from those groups.

Remove Users From the HP SAM Administrator Group

To remove users from the HP SAM Administrators list, navigate to the Users and Roles > Manage
users.
1. In the Filter Options section, from the Role list select the [Administrator]. Administrator group
names are encased in square brackets, for example [Admin Group].
2. Click Search.
3. Select the check box next to the appropriate names.
4. If you want to permanently delete the user or users from the system, select Delete in the
Operation list and click Go.
5. If you want to remove the user or users from the HP SAM Administrator Group without deleting
them from the system, perform the following steps:
a. In the Operation list, select Assign Attributes, and then click the Go button.
b. Next to the Administrator Group, select <blank> (or clear).
c. Click Save to save your changes.
After you have clicked Save, you can set SG or OU attributes, including Administrator
Managing the HP SAM Administrator Access List 45