HP BladeSystem bc2000 - Blade PC Administrator's Manual page 47

●
MicrophoneEnabled—integer value, 0 or 1. If 1, microphone input from the access device is sent
to RGS sessions. This value is only supported for RGS connections. Ignored by RDP sessions.
This feature requires RGS 5.1.3 or later. Not valid for CE. Default is 0.
●
KeyRepeatEnabled—integer value, 0 or 1. If 1, disables key repeat suppression normally required
by RGS to keep keys in hot key sequences from repeating when held down. This value is only
supported for RGS connections. Not valid for CE. Default is 0.
●
MapUSB—integer value, 0 or 1. If 1, allows USB redirection. This value is only supported for RGS
connections. Not valid for CE. Default is 0.
●
ImageQuality—integer value, 0–100. Sets image quality; 0 = lowest quality, fastest. 100 = highest
quality, slowest. This value is only supported for RGS connections. Not valid for CE. Default is 65.
●
Compression—0 or 1. If 1, RDP compression is enabled. This value is only supported for RDP
connections. Default is 1.
●
Wallpaper—0 or 1. If 1, the remote desktop wallpaper is displayed. This value is only supported
for RDP connections. Default is 0.
●
Connbar—0 or 1. If 1, a small bar is displayed at the top of the window. This window allows the
user to minimize during a full screen session. This value is only supported for RDP connections.
Default is 1.
● FullDrag—0 or 1. If 1, window contents are shown while a window is dragged. This value is only
supported for RDP connections. Default is 0.
●
Themes—0 or 1. If 1, Windows XP themes are shown in the session. This value is only supported
for RDP connections. Default is 1.
●
Animation—0 or 1. If 1, menu animation is shown in the session. This value is only supported for
RDP connections. Default is 0.
●
Caching—0 or 1. If 1, RDP bitmap caching is enabled. This value is only supported for RDP
connections. Default is 1.
● AutoReconnect—0 or 1. If 1, RDP reconnection is enabled. Not recommended for an HP SAM
solution. This value is only supported for RDP connections. Default is 0.
●
MapDrives—0 or 1. If 1, local drives are made available to the remote session. This value is only
supported for RDP connections. Default is 0.
●
MapPorts—0 or 1. If 1, local serial ports are made available to the remote session. This value is
only supported for RDP connections. Default is 0.
●
MapPrinters—0 or 1. If 1, local printers are made available to the remote session. This value is
only supported for RDP connections. Default is 0.
●
MapSmartcards—0 or 1. If 1, local smart cards are made available to the remote session. This
value is only supported for RDP connections. Default is 0.
●
ColorDepth—integer value, 8, 16, 24, or 32. The color depth for the RDP session. This value is
only supported for RDP connections. Default is 16.
●
FullScreen—0 or 1. If 1, a full screen session is created. Default is 1.
●
Keys—integer value, 0, 1, or 2. Indicates how to handle special key combinations (such as Alt +
tab) within an RDP session. If 0, the keys are handled on the local machine. If 1, the keys are
Install and Validate the HP SAM Client Software 39