Using The Administrator Feature - Lenovo ThinkPad G41 Deployment Manual

Figure 2. Enabler for Administrator Profile Deployment Feature window
6.
7.
8. Start Access Connections.
If you have not previously created profiles on the computer, the initial window for
the profile creation wizard will be displayed. After you have created at least one
profile, you will be able to view the main window of Access Connections. A
menu-bar item labeled "Profile Distribution" will be displayed.

Using the Administrator Feature

To use the Administrator Feature, do the following:
1. Create all the location profiles that users will require. Consider these and other
2. After you have created the location profiles, click Profile Distribution -->
Figure 3. Profile Distribution
3. Select the location profiles that you want to deploy. For each location profile
Select Enable Administrator Feature.
Select Exit to close the Enabler.
needs as you create the profiles:
a. Office, building connections
b. Home connections
c. Branch-office connections
d. Connections while traveling
e. Hot-spot connections
Create Distribution Package.
selected, choose the appropriate user-access policy as shown in Figure 4 on
page 14. If a profile that is selected contains a wireless profile with encryption
enabled, the administrator will be prompted to re-enter the wireless settings
data again to ensure sensitive data is not exposed.
Chapter 4. Deploying Access Connections
13