To replace the drive cage:
1 Push against the front panel with your right
hand while pushing against the back panel
with your left hand. The drive cage latch
engages when the drive cage is completely
pushed in.
2 Replace the screw under the diskette drive.
3 Reconnect any power supply cables you may
have disconnected.
Opening the Back Panel Door
You must open the door on the back panel to
access certain components on the motherboard.
(The power supply and fan are attached to the
back panel door.)
Note:
Make sure the computer is turned off and the
modem/phone cable and power cord are
disconnected from the computer.
10
hp pavilion home pc
Filename: ma1rwsc.doc
Title: HP-Print2k.dot
Template: HP-Print2K.dot
Author: Ann Schmidt
Revision #: 198
Page: 10 of 70
Printed: 04/26/01 11:33 AM
1 Remove the side panel (see "Removing the
Side Panel" on page 7).
2 Remove the screws securing the back
panel door.
Last Saved By: Jerry C. Stogsdill