Appendix A. Administrative Tools; Command Line Support; Awizard.exe; Setpassword - Lenovo ThinkCentre A62 Deployment Manual

Appendix A. Administrative tools

ThinkVantage technologies offers tools that can be implemented by corporate IT administrators. These tools
can be downloaded from the Lenovo Web site at:
http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVAN-ADMIN#rnr

Command line support

The following sections provide command line support for the Rescue and Recovery program.

AWizard.exe

The Antidote wizard executable (AWizard.exe) is located where the administrator installs it. There are no
command-line arguments.

SETPASSWORD

The SETPASSWORD command sets the user password. For a discussion about passwords, see
"Passwords" on page 42.

RELOADSCHED

This command reloads the scheduled settings that are defined in the registry. If you make changes to the
registry for scheduling, you must run this command to activate the changes.
Example:
C:\Program Files\Common Files\Lenovo\Scheduler

RRCMD command-line interface

The primary Rescue and Recovery command-line interface is RRCMD. The command is located in the
C:\Program Files\Lenovo\Rescue and Recovery\ subdirectory. The following table provides information to
use the command-line interface for the Rescue and Recovery program:
Syntax:
RRcmd <command> <location=x> [<uuid=abc> | <index=x>] [level=x]<silent>
Table 23. RRcmd parameters
Command
Backup
Restore
List
Basebackup
© Copyright Lenovo 2008, 2011
Result
Initiate a normal backup operation (must include location and name parameters).
Initiate a normal restore operation (must include location and level).
List files that are included in the backup level (must include location and level).
Initiate an alternative base backup. This is not to be used as a basis for incremental
backups, and must include the location, name and level. The level must be less than
99. If another base backup with the same level already exists, it will be overwritten.
53