Rescue And Recovery Environmental Variables - Lenovo ThinkCentre A62 Deployment Manual

Image creation
Table 6. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRUSAVE.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language
SELECT DRIVE 1
X:\PQ\PQIMGCTR
/CMD=X:\PQ\RRUSAVE.TXT
/MBI=1
/IMG=X:\IMAGE.PQI
Image deployment
Table 7. X:\PQ\PQIMGCTR / CMD=X:\PQ\RRDEPLY.TXT /MBI=1 / IMG=X:\IMAGE.PQI
Script language
SELECT DRIVE 1
X:\PQ\PQIMGCTR
/CMD=X:\PQ\RRDEPLY.TXT
/MBR=1
/IMG=X:\IMAGE.PQI
Using WIM files, ImageX, and Windows 7
Windows 7 deployment is based on disk imaging using ImageX. ImageX utilizes file-based imaging with WIM
files instead of sector-based image formats. Considering this formatting development, use the scenario
in "Scenario 5 - Performing a Bare Metal Restore from an Admin Backup" on page 50 when installing and
deploying the Rescue and Recovery program on Windows 7.
Using Symantec Ghost-based tools with Rescue and Recovery
When you create the Ghost image, you must use the command line switch -ib to capture the Rescue and
Recovery Boot Manager. Also, the image must capture the whole disk and all partitions. Refer to the
documentation provided by Symantec for specific details on Ghost.

Rescue and Recovery environmental variables

The following table contains environmental variables that are created when the Rescue and Recovery
program is installed. These variables can be used when creating scripts or when changing to a desired
directory from a command prompt. For example, to change the c:\Program Files\Lenovo\Rescue and
Recovery directory from a command prompt, type CD %rr% and press Enter.
Table 8. Rescue and Recovery environmental variables
Environmental variable
%rr%
%SWSHARE%
%TVT%
%TVTCOMMON%
Note: For a complete list of variables, run the set command on a computer that has the Rescue and
Recovery program installed.
Result
Selects the first hard disk drive.
Creates the image program.
PowerQuest script file.
Captures the Rescue and Recovery Boot Manager.
Creates the image file.
Result
Selects first hard disk drive.
Creates the image program.
Creates the PowerQuest script file.
Restores the Rescue and Recovery Boot Manager.
Creates the image file.
Directory
c:\Program Files\Lenovo\Rescue and Recovery
c:\SWSHARE
c:\Program Files\Lenovo
c:\Program Files\Common Files\Lenovo
9
.
Chapter 2 Installation