Removing And Replacing The Front Bezel - Lenovo H415 Hardware Replacement Manual

Removing and replacing the front bezel

To remove and replace the front bezel:
1. Remove the computer cover. Refer to "Removing the computer cover".
Note: For this procedure, it helps to lay the computer on its side.
2. Remove the front bezel by releasing the three plastic tabs inside the chassis
and pushing the bezel outward as shown.
3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the
corresponding holes in the chassis, then snap them into position at the bottom
and top.
4. Refer to "Completing the installation".
Hardware Replacement Guide
19