To set the white balance manually
1. Touch the Menu (
•
The "( ) Set White Balance" indicator is displayed.
2. Fill the screen with a white object, and touch the (
•
The white balance setting is stored.
3. To exit the menu, touch the Return (
•
The stored white balance setting will be applied the next time
you record.
•
When setting the white balance manually, the subject must be white, otherwise, your camcorder
may not detect an appropriate setting value.
•
The adjusted setting remains until you set the white balance again.
•
During normal outdoor recording, setting to "Auto" may provide better results.
•
Cancel the digital zoom function for clear and precise setting.
•
Reset the white balance if light conditions change.
ISO
ISO sensitivity function sets the light sensitivity of the camcorder's image sensor. A higher ISO
setting allows the camcorder to select a higher shutter speed, thus reducing the image-shaking
when recording without flash under dimmer conditions since it increases the light sensitivity of
the image sensor.
PRECHECK!
Select the Photo record (
1. Touch the Menu (
item.
2. To exit the menu, touch the Return (
Submenu items
•
Auto: Sets Aperture to Auto.
•
50(
): Records in a bright place as a low sensitivity.
ISO
ISO
50
•
100(
ISO
ISO
): Records in a normal situation as a normal sensitivity.
100
•
200(
): Increases the shutter speed and minimise noises of the
ISO
ISO
200
images to record in a dark place.
•
400(
)/800(
)/1600(
ISO
ISO
ISO
ISO
400
800
high sensitivity. The recorded images may be with noise.
The high sensitivity of ISO values may give images with noise.
) tab
"White Balance"
) tab.
) mode by pressing the MODE button.
) tab
"ISO"
touch the desired submenu
) tab.
)/2400(
): Records in a dark place as a
ISO
ISO
ISO
ISO
1600
2400
"Custom WB."
) tab.
OK
page 80
page 27
OK
ISO
ISO
AUTO
AUTO
AUTO
ISO
ISO
5
5
50
M
M
ISO
ISO
100
ISO
ISO
ISO
ISO
AUTO
200
ISO
ISO
400
AUTO
AUTO
65