Table of Contents
Advertisement
SETTING THE ANTI-SHAKE
(OIS: OPTICAL IMAGE STABILISER)
Use the Anti-shake (OIS: Optical Image Stabiliser) function to compensate for unstable images
caused by shaking movements when holding the camcorder.
Press the Anti-shake (OIS) (
(OIS) mode between On and Off.
Use the Anti-Shake function in the following cases
•
When recording while walking or when recording in a
moving car.
•
When recording with the zoom function.
•
When recording subjects of a small size.
•
The Smart Auto mode automatically sets the Anti-shake (OIS) to On.
•
Gross camcorder shake may not be entirely corrected even if the Anti-shake is set to On.
Firmly hold the camcorder with both hands.
•
When this function is set to On, the actual movement of the subject and the movement displayed
on the screen may be slightly different.
•
When recording in dark lighting at high magnification while this function is set to On, after-images
may stand out. In this case, we recommend using a tripod (not supplied) and turning the Anti-shake
to Off.
) button to toggle the Anti-shake
NOR
NOR
45
Advertisement
Table of Contents
