Setup (Other Setup Items) - Sony Handycam NEX-VG30E Instruction & Operation Manual

Setup
(Other setup items)
See "Using menus" (p. 65) on the operation.
The default settings are marked with .
Media Info
You can check the remaining recordable
time on the memory card for each
recording mode, and also the approximate
free and used media space.
To turn off the display
Touch .

Notes
Since there is a management file area, the used

space may not be displayed as 0 % even if you
perform [Format] (p. 81).
Tips

The camcorder can display the information of

the memory card.
Format
Formatting deletes all the movies and
photos to recover recordable free space.
Select the media to be formatted, touch

.

Notes
Connect your camcorder to the wall outlet (wall

socket) using the supplied AC Adaptor for this
operation (p. 16).
To avoid the loss of important images, you

should save them before formatting the
recording media.
Protected movies and photos will also be

deleted.
While [Executing...] is displayed, do not close

the LCD screen, operate the buttons on the
camcorder, disconnect the AC Adaptor, or eject
the memory card from your camcorder. (The
access lamp is lit or flashing while formatting
memory card.)
Repair Img. DB F.
See page 91, 94.
File Number
You can select the way to assign file number
of photos.
 Series
Assigns file numbers of photos in sequence.
The file number becomes larger each time
you record a photo.
Even if the memory card is replaced with
another one, the file number is assigned in
sequence.
Reset
Assigns file numbers in sequence, following
the largest file number existing on the
memory card.
When the memory card is replaced with
another one, the file number is assigned for
each memory card.
Data Code
During playback, your camcorder displays
the information (Date/Time, Camera
Data) recorded automatically at the time of
recording.
 Off
Data code is not displayed.
Date/Time
Displays the date and time.
Camera Data
Displays camera setting data.
Date/Time
 Date
 Time
GB
1