Table of Contents
Advertisement
3. Push down the locks on the retention mechanism to secure the
heatsink and fan to the module base.
When secure, the retention locks should point to opposite directions.
Figure 2-11
Fan and Retention Mechanism Installed and Locked
2.4.4 Connecting the CPU fan cable
When the fan, heatsink, and the retention mechanism are in place,
connect the CPU fan cable to the connector on the motherboard labeled
(CPU_FAN)
Figure 2-12
CPU Fan Connector
Don't forget to connect the CPU fan connector! Hardware monitoring
errors may occur if you fail to plug this connector.
ASUS P4B-LS motherboard user guide
2-9
Advertisement
Table of Contents
