Using The Scan Key On Your Network - Brother DCP-8110DN Software User's Manual

Network Scanning

Using the Scan key on your network

You can use (SCAN) on the control panel or Scan on the touchscreen to scan documents into your
word processing, graphics or E-mail applications or a folder on your computer.
Before you can use
machine to your computer. If you installed the MFL-Pro Suite from the included installer CD-ROM then the
correct drivers and ControlCenter4 or ControlCenter2 are installed. Scanning from the
or Scan follows the configuration of the Device Scan Settings screen of ControlCenter4 or Device Button
tab of ControlCenter2. (For Windows
Configuring Scan key settings uu page 96 for Advanced Mode. For Macintosh, see SCAN uu page 180.)
For details about how to configure the scan settings of ControlCenter4 or ControlCenter2 buttons and to
launch the application of your choice using
ControlCenter2 uu page 178.
(SCAN) or Scan, you have to install the Brother MFL-Pro Suite and connect the
®
, see Configuring Scan key settings uu page 82 for Home Mode or
(SCAN) or Scan, see ControlCenter4 uu page 70 or
13
(SCAN) button
13
227