Table of Contents
Advertisement
2.13 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.
2.14 Installing Windows
TM
Vista
64-bit / XP / XP 64-bit With RAID Functions
If you want to install Windows
XP 64-bit on a RAID disk composed of 2 or more SATA3 HDDs with RAID functions,
please follow below procedures according to the OS you install.
2.14.1 Installing Windows
If you want to install Windows
more SATA3 HDDs with RAID functions, please follow below steps.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the "SATA Mode" option to [RAID].
STEP 2: Make a SATA3 Driver Diskette. (Please use an USB floppy or a floppy
disk.)
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM as
the boot device.
C. When you see the message on the screen, "Generate Serial ATA driver diskette
[YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press any key.
E. The system will start to format the floppy diskette and copy SATA3 drivers into
the floppy diskette.
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
8 / 8 64-bit / 7 / 7 64-bit / Vista
®
XP / XP 64-bit With RAID Functions
®
XP / XP 64-bit on a RAID disk composed of 2 or
Advanced screen
37
TM
/
TM
TM
/ Vista
64-bit / XP /
Storage Configuration.
Hide quick links:
Advertisement
Table of Contents
