Table of Contents
Advertisement
Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U
How to Configure WEP
To configure WEP data encryption, follow these steps:
Note: If you use a wireless PC configure WEP settings, you will be disconnected when
you click on Apply. You must then either configure your wireless adapter to match the
wireless router WEP settings or access the wireless router from a wired PC to make any
further changes.
Log in to the WGT634U firewall at its default LAN address of
1.
default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
Click the Wireless Settings link in the Setup section of the main menu.
2.
Under Security Options, select WEP.
3.
From the Security Encryption menu drop-down list, select the WEP encryption strength you
4.
will use.
Figure 4-7.
Wireless Settings encryption menu
You can manually or automatically program the four data encryption keys. These values must
5.
be identical on all PCs and Access Points in your network.
•
Automatic - Enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
•
Manual - Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F)
Select which of the four keys will be active.
Please refer to
"Overview of WEP Parameters" on page D-5
these options, as defined by the IEEE 802.11 wireless communication standard.
Click Apply to save your settings.
6.
4-12
Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual
http://192.168.1.1
with its
for a full explanation of each of
Wireless Configuration
Advertisement
Table of Contents
Troubleshooting
