Table of Contents
Advertisement
Preliminary Manual for the 108 Mbps Wireless Media Router WGT634U
In your IP network, each PC and the firewall must be assigned a unique IP addresses. Each PC
must also have certain other IP configuration information such as a subnet mask (netmask), a
domain name server (DNS) address, and a default gateway address. In most cases, you should
install TCP/IP so that the PC obtains its specific network configuration information automatically
from a DHCP server during bootup. For a detailed explanation of the meaning and purpose of
these configuration items, refer to
The WGT634U Wireless Media Router is shipped preconfigured as a DHCP server. The firewall
assigns the following TCP/IP configuration information automatically when the PCs are rebooted:
•
PC or workstation IP addresses—192.168.1.2 through 192.168.1.254
•
Subnet mask—255.255.255.0
•
Gateway address (the firewall)—192.168.1.1
These addresses are part of the IETF-designated private address range for use in private networks.
Configuring Windows 95, 98, and Me for TCP/IP Networking
As part of the PC preparation process, you need to manually install and configure TCP/IP on each
networked PC. Before starting, locate your Windows CD; you may need to insert it during the
TCP/IP installation process.
Install or Verify Windows Networking Components
To install or verify the necessary components for IP networking:
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
1.
Double-click the Network icon.
2.
The Network window opens, which displays a list of installed components:
C-2
Preliminary - Go to http://kbserver.netgear.com/products/wgt634U.asp for final manual
"Appendix B, "Network, Routing, Firewall, and
Basics".
Preparing Your Network
Advertisement
Table of Contents
Troubleshooting
