Chapter 2. Overview Of The Lenovo Thinkserver Management Module; Features Of The Thinkserver Remote Management Module - Lenovo ThinkServer RD330 User Manual

Thinkserver management module user guide

Hide thumbs Also See for ThinkServer RD330:

Table of Contents

Chapter 2. Overview of the Lenovo ThinkServer Management

Module

This topic describes the features of the Remote Management Module.

The Remote Management Module runs on the server system as an integrated solution and integrates

the embedded operating system. Independent of the server operating system, the embedded operating

system can provide a whole set of complete, stable and effective solution for the server. As a system

administrator, you can respond anytime and anywhere to emergency failure and take remote control on

the server through the network.

The ThinkServer Remote Management Module is easily accessible by remote KVM and controllable via LAN

or Internet. It will digitize and compress the collected video signal, keyboard, mouse signals and then

send to the remote console. Embedded with remote access and related control software, the module

also allows integrated remote power management via IPMI. Key features of the Remote Management

Module are as follows:

• Embedded Web UI - Remote power on / off, system health, system information, alert notification and

event log.

• USB 2.0 media redirection - boot from remote media

• Security - open source SSL

• Compatible with IPMI V2.0

• KVM - allow remote viewing and configuring in the POST and BIOS setup utility

Table of Contents