Power Control - Lenovo ThinkServer RD330 User Manual

Figure 14. Redirecting virtual device
• Redirect CDROM / Redirect ISO: Enables you to redirect the local CD-ROM/DVD drivers or ISO images
in the file system of local client to virtual CD-ROM devices in the remote systems.
• Redirect Floppy/USB Key/Redirect Floppy/USB Key Image: Enables you to redirect the local floppy
device, local USB key device, or the IMG files for floppy disk to the virtual floppy devices in the remote
system.
These virtual devices can read, write (providing the property is not read only), and boot, which are similar
with any other CD-ROMs or floppies in the remote system. But only when certain media redirections are
active, these virtual devices are available in the remote operating system or BIOS setting menu. The setting
is valid after remote system reset or it is power-on or power-off. These devices will not disappear from the
remote system until the relevant check boxes in the remote console window are cleared.

Power control

The Power Control page shows the server power status.
Figure 15. Power control
You can perform the following power control operations:
.
Chapter 6 ThinkServer Remote Management Module Web console options
21