Kyocera FS-C8500DN User Manual page 92

EcoPrint
E
text and graphics, appear lighter in the printed job. The actual amount of toner used
depends on the printing system mode and the type of data printed (text, graphics, or
both). EcoPrint does not increase print speed. This feature is also available in the
Quick Print and Basic tabs.
e-MPS
system memory, so that you can print or reprint them later. Print jobs can easily be
reprinted later from the printing system's operation panel, and printing of sensitive
documents can be restricted to approved users.
Enable client profile
accessed by clients in a client/server environment. This feature in the Advanced tab
enables an administrator to control and distribute profiles.
F Fast printing
Finishing edge
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
GDI compatible mode
G
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
Gutter
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
Job accounting
J
pages printed by each account ID. Account IDs can be assigned at the printing system
and stored in the driver. After account IDs are assigned, you can use the Job
accounting option to print in the Job accounting mode.
Job Name
print the job from the printing system's operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name to the
job or use the name of the application file.
Job storage
printing later. You also have the option of protecting the print job from unauthorized
printing by using an access code. This feature is available when a hard disk is installed
and selected in the Device Settings tab.
Media source enumeration
M
compatibility for cassettes and feeders between old drivers and new drivers or when
moving from one manufacturer to another. Compatibility creates a smooth transition
for environments using macros or PRESCRIBE commands to access cassettes and
feeders.
vi
Imaging feature that changes toner saturation, making the entire image,
Job storage (e-MPS) is a set of options for saving print jobs in printing
Client profile refers to profile settings saved on a server and
Printing mode that decreases spool size and increases print speed.
Finishing edge aligns the matching sides of two different page
A page description language option that accurately
Blank space on the left side or top of a printed page that can be increased
An accounting system that records and controls the number of
A Job name is a unique identifier for each print job, to help you find and
Job option that stores a print job permanently on a hard disk for
A Device Settings option that maintains
User Guide