Kyocera FS-C2126MFP Operation Manual page 86

Settings for Memory Forwarding from COMMAND CENTER (Forward)
You can use COMMAND CENTER on a computer connected to the network to specify the memory forwarding
settings on this machine.
Refer to the machine's Operation Guide for information on the network settings.
Accessing COMMAND CENTER
1
Open the web browser.
2
In the Address or Location bar, enter the machine's
IP address as the URL, e.g. http://192.168.48.21/.
The web page displays basic information about the
machine and COMMAND CENTER as well as the
current status of the machine.
3
Select a category from the navigation bar on the
left to view and set values for that particular
category.
4
If administrator privileges have been enabled on
COMMAND CENTER, remember to enter the
correct user name and password when trying to
access the relevant screens.
Setting Administrator Password restricts general
users' access to pages other than the Start page.
For security purposes, setting the Administrator
password is highly recommended. The default
Administrator password is factory-set as admin00.
4-26
FAX Operation (Advanced)