Status Read Command; Format; Transfer Example - Sanyo PLC-HF15000L - 15000 Lumens Manual

PLC-HF15000L Basic Serial Command Functional Specifications
7

Status Read Command

7.1

Format

1) PC issues a command in the format below:
"CR" Command [CR]
Command: Single character (Refer to Status Read Command Table)
2) When a projector receives the appropriate command, it returns the required information as
a data string.
Required Data [CR]
Required Data: String (Refer to Status Read Command Table)
3) When the received data cannot be decoded, the projector returns "?" [CR].
7.2

Transfer Example

Get the selected input for the projector by Basic Commands.
PC → Projector
Projector → PC
Command (issue the current input read command)
"C" "R" "1" CR
(Indicates Input 1 is selected)
15/23
"1"
Response
(A few ms - 1s)
CR