Connecting To Dvi (Digital Visual Interface); Connecting A Digital Audio System - Samsung HLS5686WX - 56" Rear Projection TV Owner's Instructions Manual

Connecting to DVI (Digital Visual Interface)

Connect a set of audio
1
cables between the DVI
AUDIO (L, R) IN jacks on the
TV and the AUDIO OUT
jacks on the Set-Top Box.
Connect an HDMI/DVI cable
2
between the HDMI 2/DVI IN
jack on the TV and the DVI
OUT jack on the Set-Top Box.
NOTES
• Make sure the DVI source's
power is on, or you will be
unable to select it in the
TV menu's source list.
• The HDMI/DVI IN jack is not
compatible with PC.

Connecting a Digital Audio System

There are many types of digital audio systems on the market today.
A simplified illustration of an audio system is shown below.
For more information, see your audio system owner's manual.
If your audio system has an
1
optical digital audio input,
connect to the DIGITAL
AUDIO OUT (OPTICAL) jack
on the TV.
NOTE
• OPTICAL: converts the electric
signal into an optical light
signal, and transmits it through
glass fibers.
• When a Digital audio system is
connected to the Digital Audio
Out (Optical) terminal:
Decrease the gain (volume) of
the TV, and adjust the volume
level with the audio system's
volume control.
TV Rear Panel
Incoming
Cable or
Antenna
TV Rear Panel
Audio System
1
2
DTV Set-Top Box
1
English - 23