Standard Cmos Features - Gigabyte GA-A75-UD4H User Manual

User manual
Table of Contents

Advertisement

2-4

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Date (mm:dd:yy)
Time (hh:mm:ss)
 IDE Channel 0 Master
 IDE Channel 0 Slave
 IDE Channel 1 Master
 IDE Channel 1 Slave
 IDE Channel 2 Master
 IDE Channel 3 Master
Halt On
Base Memory
Extended Memory
higf: Move
Enter: Select
F5: Previous Values
Date (mm:dd:yy)
Sets the system date. The date format is week (read-only), month, date and year. Select the desired field
and use the up arrow or down arrow key to set the date.
Time (hh:mm:ss)
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow or
down arrow key to set the time.
IDE Channel 0, 1 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
IDE Channel 0, 1 Master/Slave
Configure your SATA devices by using one of the two methods below:
Lets the BIOS automatically detect SATA devices during the POST. (Default)
• Auto
If no SATA devices are used, set this item to None so the system will skip
• None
the detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
IDE Channel 2, 3 Master
IDE Auto-Detection
Press <Enter> to autodetect the parameters of the SATA device on this channel.
Extended IDE Drive
Configure your SATA devices by using one of the two methods below:
Lets the BIOS automatically detect SATA devices during the POST. (Default)
• Auto
If no SATA devices are used, set this item to None so the system will skip
• None
the detection of the device during the POST for faster system startup.
Access Mode
Sets the hard drive access mode. Options are: Auto (default), Large.
Capacity
Approximate capacity of the currently installed hard drive.
BIOS Setup
Standard CMOS Features
Wed,
May 25 2011
22:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[All, But Keyboard]
640K
766M
+/-/PU/PD: Value
F10: Save
F6: Fail-Safe Defaults
- 42 -
Item Help
Menu Level 
ESC: Exit
F1: General Help
F7: Optimized Defaults

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents