Table of Contents
Advertisement
•
Setting a user password restricts who can boot the computer. The password
prompt is displayed before the computer is booted. If only the supervisor
password is set, the computer boots without asking for a password. If both
passwords are set, you can enter either password to boot the computer.
For instructions on resetting the password, see Clearing Passwords on page 52.
Hardware Management Features
The hardware management features of Desktop Board DG35EC enable the board to be
compatible with the Wired for Management (WfM) specification. The board has several
hardware management features including the following:
•
Fan speed monitoring and control
•
Thermal and voltage monitoring
•
Chassis intrusion detection
Hardware Monitoring and Fan Speed Control
The features of the hardware monitoring and fan speed control include:
•
Monitoring of power supply voltages to detect levels above and below acceptable
values
•
Fan speed controllers and sensors integrated into the legacy I/O controller
•
Thermal sensors in the processor, GMCH, and ICH8, plus an onboard remote
sensor
•
Thermally monitored closed-loop fan control, for all onboard fans, that can adjust
fan speed or switch the fans off as needed
Chassis Intrusion
The board supports a chassis security feature that detects if the chassis cover has
been removed. The security feature uses a mechanical switch on the chassis that can
be connected to the chassis intrusion header on the Desktop Board. See Figure 23 for
the location of the chassis intrusion header.
Desktop Board Features
19
- Quick Links:
- Desktop Board Components
- Main Memory
Hide quick links:
Advertisement
Table of Contents
