Using Shortcut Icons; Manage Location Profiles Window-Create Shortcut - Lenovo 20074CU User Manual

Delete:
Location Switching:
By default, all existing location profiles are shown in the Manage Location Profiles
window. To hide a profile from the Locations list and the Fn+F5 on-screen menu,
and to remove the profile from automatic location switching, clear the check box to
the left of the name of that profile.

Using shortcut icons

You can create a shortcut icon on your desktop for each of the profiles you use
most often. Then you will be able to switch on a location profile by clicking the
shortcut icon for it. To create a shortcut icon, open the Manage Location Profile
panel, select the profile, and right-click it. From the pull-down menu, select either
Create Shortcut – Connect or Create Shortcut - Disconnect.
Figure 39. Manage Location Profiles window—Create Shortcut
You can switch to a different profile by entering a command from the command
prompt:
<path>\qctray.exe /set [ Location profile name ]
It is not necessary to start up the Access Connections beforehand. To disconnect,
use the following command:
<path>\qctray.exe /reset [Location profile name]
Permanently remove the selected location profile.
Switch location profiles automatically.
Chapter 2. Using location profiles
43