Lenovo 20074CU User Manual page 39

Using Wi-Fi Protected Access - Pre-Shared Key (WPA-PSK)
If you selected Use WPA-PSK key as the wireless security type, the WPA-PSK
Settings window opens.
Figure 30. Wi-Fi Settings window
You can configure the following settings:
Data encryption
Pre-Shared Key
Use this profile to connect during Windows logon
Using Windows standard features to configure 802.1x
If your computer is running Windows XP, you can configure 802.1x, including WPA,
by selecting either Windows standard functions or Access Connections. A profile
configured by use of Access Connections can be distributed as a package. For
more information about distributing location profiles, see Appendix A, "Frequently
asked questions," on page 73, question 9 on page 73 and question 10 on page 74.
The popup lists the data encryption modes available for the wireless LAN
card that is installed on your system. Select the data encryption mode, such
as WEP, TKIP, or AES. The mode should match the settings of the access
point. Consult your network administrator for the appropriate settings.
The key entered here will be used for encrypting the actual transmission.
Enter the same key as the one set on the access point. You can use either
alphanumeric or hexadecimal characters; if you use hexadecimal, be sure
to enter all 64 digits correctly.
Select this check box if you want to connect to the network by use of this
profile when you first power on your computer, without logging on to
Windows.
Chapter 2. Using location profiles
29