Eizo L985 EX User Manual page 14

English
Digital Input
Signal Cable (FD-C35
enclosed)
NOTE
• The monitor is not compatible with a Power Mac G4/G4 Cube ADC (Apple
Display Connector)
2.
Plug the power cord into the power connector on the rear of the
monitor.
3.
Lead the power cord and signal cable into the cable holder at rear of
the monitor.
NOTE
• When housing the cables into the cable holder, lead them to the cable entrance
side and pinch the projection to open the cable entrance.
• The cables are recommended to lead with slight sag for the smooth motion of
the stand and the Portrait/Landscape display.
4.
Plug the other end of the power cord into a power outlet.
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may cause in fire or electric shock.
14
2. CABLE CONNECTION
Signal Cable
Cable Holder
WARNING
Connector
Video Output
Connector / DVI
Input Connector
(monitor) / DVI
Projection
Cable Entrance
PC
Digital graphics board