How To Use; Vacuum Description; On-Off Switch; Suction Only Mode/ Brushroll Shut-Off - Hoover UH70603 Owner's Manual

vacuuM description

1. Handle**
2. ON/OFF Switch
3. Dirt Cup Release Button
4. Carry Handle
5. Dirt Cup
6. Stair Cleaning Handle
7. Headlight*
8. Height Adjustment
9. Furniture Guard
10. Brushroll On/Off Pedal*
(Suction Only Mode)
11. Cord Rewind Pedal*
12. Filter made with HEPA media
and Carbon Filter* Access
13. Rinsable Filter Access
14. System Check Indicator
15. Air-Powered Hand Tool **
16. Crevice Tool (inside wand)
17. Telescoping Wand
18. Hose
19. Handle Release Pedal
20. Hose Tube
21. Hose Release Button
22. Dusting/ Upholstery Tool**

on-off switch

2.2
2.2 Plug cord into
electrical outlet.
To turn vacuum ON,
push ON/OFF switch
once.
To turn vacuum OFF,
push switch again.

cord release

2.4
Actual model may vary from images shown.

2. how to use

2.1
4
5
6
7
8
9
*Available on select models only
**Varies per model

suction onlY Mode/ brushroll shut-off

for bare floors and very high pile carpet
2.3
A
2.4 Grasp the end of the plug and pull to release cord
from cord reel until red tape is reached.
IMPORTANT
When pulling on the cord, yellow tape will identify
when the cord is almost fully extended. When red
tape is visible on the cord, the cord has reached its full
length. Do not pull the cord past the red tape
1
2
15
14
3
13
16
17
12
11
10
2.3 For optimal cleaning performance on bare floors
and carpet with pile deeper than 1", brushroll should
be turned off.
The vacuum is shipped with the brushroll in the ON
position. To turn brushroll OFF for Suction Only
Mode, step on pedal (A).
IMPORTANT
Pedal (A) is inactive when the cleaner is in the
upright position.
!
Brushroll should be in off position for cleaning of
high pile carpet deeper than 1".
6
18
19
CAUTION
22
21
20
!