HP Jetdirect 610n Hardware Installation Manual page 19

Figure 2-2 Example of HP Jetdirect Configuration Page
(600N)
I/O CARD READY
(615N/610N)
I/O CARD READY
3. If I/O CARD READY appears, the card has been installed
successfully. Proceed to
Network Parameters Required for Your
4. If I/O CARD READY does not appear, check that you have:
Installed the card correctly and properly connected the card
to the network
Verified that the network is operating properly
Turned the printer off and then on again
ENWW
"Step 6. Configure the Card with
Installing the Print Server 2-19
Network."