Step 2. (J4167A Only) If Necessary, Set The Token Ring Data Rate Switch - HP Jetdirect 610n Hardware Installation Manual

Step 2. (J4167A Only) If Necessary, Set
the Token Ring Data Rate Switch
If you have an HP J4167A 610N Token Ring print server,
you must set the Data Rate switches on the card to either 4 Mbps
or 16 Mbps. The selection depends on the data rate of your
Token Ring network.
4 Mbps
a. Locate the Token Ring card Data Rate switches.
b. Set the switches to 4 or 16 Mbps. The default is 16 Mbps.
2-14 Installing the Print Server
16 Mbps
ENWW