Konica Minolta bizhub C220 User Manual page 130

10.5 Parameter details
Function Name
[Print Type:]
[Binding Posi-
tion:]
[Poster Mode:]
[Overlap width
line]
[Rotate 180]
[Image Shift]
[Chapters]
[Staple:]
[Punch:]
[Fold & Staple:]
[Paper Arrange-
ment:]
Reference
- The [Staple:] function is available only if the optional Finisher FS-527 or Finisher FS-529 is installed.
- The [Punch:] function is available only when the Punch Kit is installed on the optional Finisher FS-527.
- The [Fold & Staple:] function is available only when the Saddle Stitcher is installed on the optional Fin-
isher FS-527.
bizhub C360/C280/C220
Option
[1-Sided], [2-Sided],
[Booklet]
[Left Bind], [Right Bind],
[Top Bind]
Off, 2 e 2, 3 e 3, 4 e 4
ON/OFF
ON/OFF
ON/OFF
[Front Side]/[Back Side]
ON/OFF
[Page Number:]
ON/OFF
ON/OFF
OFF, [Center Staple and
Fold], [Half-Fold]
[Prioritize Arranging Pa-
pers]/[Prioritize Produc-
tivity]
Description
Specify 2-Sided Print or Booklet printing.
Specify the binding position.
Select this option to print one sheet of an original divid-
ed into multiple pages. In [Overlap width line], specify
the presence of the border frame.
Printing documents containing pages of different sizes
or orientations in one job may cause images to be par-
tially lost or overlapped.
Specify the presence of overlap width line. It can be
specified when Poster Mode is set to an option other
than [Off].
Select this check box to rotate the document 180° to
print.
Select this check box to print by shifting the entire print
image. In the window that appears when this option is
selected, detailed amount of shift can be specified.
Specify the shift direction and values. For 2-sided print-
ing, clearing the [Same value for Front and Back sides]
check box allows you to specify different values for the
front and back sides.
Select this check box to specify the page to be printed
on the front side. In the window that appears when this
option is selected, the page can be specified.
It can be specified when Print Type is [2-Sided] or
[Booklet].
Specify the pages to be printed on the front side when
[Chapters] is selected.
Select this check box to specify stapling.
From the drop-down list, specify the number of staples
and the stapling position.
Select this check box to specify hole punching.
From the drop-down list, specify the number of punch-
es.
Specify the fold and staple.
Specify the method for paper arrangement (adjusting
the binding position) for 2-sided printing. When [Priori-
tize Arranging Papers] is selected, the paper arrange-
ment process is performed after receiving all data.
When [Prioritize Productivity] is selected, the paper ar-
rangement process is performed while receiving and
printing data.
10
10-14