Cpu Level Up [Auto]; Cpu Overclocking [Auto] - Asus M5A88-V EVO User Manual

3.5.1

CPU Level UP [Auto]

Allows you to select a CPU level, and the related parameters will be automatically adjusted
according to the selected CPU level. If you want to manually configure the settings in detail,
set CPU Overclocking to [Manual] after selecting a CPU level.
Configuration options: [Auto] [Phenom II-955] [Phenom II-3.4G] [Phenom II-3.6G]
•
•
3.5.2

CPU OverClocking [Auto]

Allows you to select the CPU overclocking options to achieve the desired CPU internal
frequency. Select any of these preset overclocking configuration options:
Manual
Auto
D.O.C.P
Overclock Profile
The configuration options for the following sub-items vary depending on the CPU/DIMMs
you install on the motherboard.
CPU/HT Reference Clcok (MHz) [XXX]
This item appears only when you set the CPU OverClocking item to [Manual] or [D.O.C.P]
and displays the frequency sent by the clock generator to the system bus and PCI bus. Use
the <+> and <-> keys to adjust the CPU Bus frequency. You can also key in the desired
frequency using the numeric keypad. The values range from 100MHz to 550MHz.
PCIE Frequency [XXX]
This item appears only when you set the CPU OverClocking item to [Manual] and allows you
to set the PCI Express frequency. Use the <+> and <-> keys to adjust the PCIE frequency.
You can also key in the desired value using the numeric keypad. The values range from
100MHz to 150MHz.
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the CPU OverClocking item to [D.O.C.P.] and allows
you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz]
[DDR3-1866MHz] [DDR3-2000MHz]
3-16
The configuration options vary depending on the CPU model you install on the
motherboard.
The CPU Level UP function support depends on CPU types.
Allows you to individually set overclocking parameters.
Loads the optimal settings for the system.
Allows you to select a DRAM O.C. profile, and the related parameters
will be adjusted automatically.
Allows you to select an overclocking profile.
Chapter 3: BIOS setup