Table of Contents
Advertisement
Table 1.
Feature Summary (continued)
Expansion
Capabilities
Hardware Monitor
Subsystem
1.2.2 Manufacturing Options
Table 2 describes the manufacturing options on the Desktop Boards D915GEV and D915GRF.
Not every manufacturing option is available in all marketing channels. Please contact your Intel
representative to determine which manufacturing options are available to you.
Table 2.
Manufacturing Options
ATAPI CD-ROM
Connector
ATX Fan
Connector
IEEE-1394a
Interface
SCSI Hard Drive
Activity LED
Connector
Serial Port B
S/PDIF Connector
For information about
Available configurations for the Desktop Boards D915GEV and D915GRF
• Four PCI Conventional bus add-in card connectors (SMBus routed to PCI
Conventional bus connector 2)
• Two PCI Express x1 bus add-in card connectors
• One PCI Express x16 bus add-in card connector
• Hardware monitoring and fan control ASIC
• Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan connectors
• Three fan sense inputs used to monitor fan activity
• Fan speed control
A connector for attaching an internal CD-ROM drive to the onboard audio subsystem
Additional fan connector for use in larger chassis
IEEE-1394a controller and three IEEE-1394a connectors (one back panel connector,
two front-panel connectors)
Allows add-in hard drive controllers (SCSI or other) to use the same LED as the
onboard IDE controller
Second serial port accessible via a connector on the component side of the board
A 1 x 3 connector (mounted on the component side of the board) that provides digital
audio signals in S/PDIF format
Product Description
Refer to
Section 1.3, page 17
13
Advertisement
Table of Contents
